Next: , Previous: , Up: File Input and Output   [Contents][Index]

13.3 Functions and Variables for File Input and Output

Function: appendfile (filename)

Appends a console transcript to filename. appendfile is the same as writefile, except that the transcript file, if it exists, is always appended.

closefile closes the transcript file opened by appendfile or writefile.

Categories: File output · Console interaction ·
Function: batch
    batch (filename)
    batch (filename, option)
    batch (S)
    batch (S, option)

batch(filename) reads Maxima expressions from filename and evaluates them. batch searches for filename in the list file_search_maxima. See also file_search.

batch(S) reads Maxima expressions from the input stream S as created by openr. The behavior of batch in this case is the same as if the input were a file name, and in the remainder of this description, what is said about input files applies to input streams as well, except that the comments about searching for files do not apply to streams.

batch(filename, demo) is like demo(filename). In this case batch searches for filename in the list file_search_demo. See demo.

batch(filename, test) is like run_testsuite with the option display_all=true. For this case batch searches filename in the list file_search_maxima and not in the list file_search_tests like run_testsuite. Furthermore, run_testsuite runs tests which are in the list testsuite_files. With batch it is possible to run any file in a test mode, which can be found in the list file_search_maxima. This is useful, when writing a test file.

filename comprises a sequence of Maxima expressions, each terminated with ; or $. The special variable % and the function %th refer to previous results within the file. The file may include :lisp constructs. Spaces, tabs, and newlines in the file are ignored. A suitable input file may be created by a text editor or by the stringout function.

batch reads each input expression from filename, displays the input to the console, computes the corresponding output expression, and displays the output expression. Input labels are assigned to the input expressions and output labels are assigned to the output expressions. batch evaluates every input expression in the file unless there is an error. If user input is requested (by asksign or askinteger, for example) batch pauses to collect the requisite input and then continue.

It may be possible to halt batch by typing control-C at the console. The effect of control-C depends on the underlying Lisp implementation.

batch has several uses, such as to provide a reservoir for working command lines, to give error-free demonstrations, or to help organize one’s thinking in solving complex problems.

batch evaluates its arguments.

When called with no second argument or with the option demo, batch returns the path of filename, if the argument is a file name, or the path of the file for which the input stream was opened, if the argument is a file input stream. If the argument is a string input stream, a representation of the input stream is returned.

When called with the option test, the return value is a an empty list [] or a list with filename and the numbers of the tests which have failed.

See also load, batchload, and demo.

Categories: Session management · File input ·
Function: batchload
    batchload (filename)
    batchload (S)

Reads Maxima expressions from input file filename or input stream S and evaluates them, without displaying the input or output expressions and without assigning labels to output expressions. Printed output (such as produced by print or describe)) is displayed, however.

The special variable % and the function %th refer to previous results from the interactive interpreter, not results within the file. The file cannot include :lisp constructs.

batchload evaluates its argument.

batchload returns the path of filename, if the argument is a file name, or the path of the file for which the input stream was opened, if the argument is a file input stream. If the argument is a string input stream, a representation of the input stream is returned.

See also batch, and load.

Categories: Session management · File input ·
Function: closefile ()

Closes the transcript file opened by writefile or appendfile.

Categories: File output · Console interaction ·
Option variable: file_output_append

Default value: false

file_output_append governs whether file output functions append or truncate their output file. When file_output_append is true, such functions append to their output file. Otherwise, the output file is truncated.

save, stringout, and with_stdout respect file_output_append. Other functions which write output files do not respect file_output_append. In particular, plotting and translation functions always truncate their output file, and tex and appendfile always append.

Categories: File output · Global flags ·
Function: filename_merge (path, filename)

Constructs a modified path from path and filename. If the final component of path is of the form ###.something, the component is replaced with filename.something. Otherwise, the final component is simply replaced by filename.

The result is a Lisp pathname object.

Categories: File input · File output ·
Function: file_search
    file_search (filename)
    file_search (filename, pathlist)

file_search searches for the file filename and returns the path to the file (as a string) if it can be found; otherwise file_search returns false. file_search (filename) searches in the default search directories, which are specified by the file_search_maxima, file_search_lisp, and file_search_demo variables.

file_search first checks if the actual name passed exists, before attempting to match it to “wildcard” file search patterns. See file_search_maxima concerning file search patterns.

The argument filename can be a path and file name, or just a file name, or, if a file search directory includes a file search pattern, just the base of the file name (without an extension). For example,

file_search ("/home/wfs/special/zeta.mac");
file_search ("zeta.mac");
file_search ("zeta");

all find the same file, assuming the file exists and /home/wfs/special/###.mac is in file_search_maxima.

file_search (filename, pathlist) searches only in the directories specified by pathlist, which is a list of strings. The argument pathlist supersedes the default search directories, so if the path list is given, file_search searches only the ones specified, and not any of the default search directories. Even if there is only one directory in pathlist, it must still be given as an one-element list.

The user may modify the default search directories. See file_search_maxima.

file_search is invoked by load with file_search_maxima and file_search_lisp as the search directories.

Categories: File input ·
Option variable: file_search_maxima
Option variable: file_search_lisp
Option variable: file_search_demo
Option variable: file_search_usage
Option variable: file_search_tests

These variables specify lists of directories to be searched by load, demo, and some other Maxima functions. The default values of these variables name various directories in the Maxima installation.

The user can modify these variables, either to replace the default values or to append additional directories. For example,

file_search_maxima: ["/usr/local/foo/###.mac",
    "/usr/local/bar/###.mac"]$

replaces the default value of file_search_maxima, while

file_search_maxima: append (file_search_maxima,
    ["/usr/local/foo/###.mac", "/usr/local/bar/###.mac"])$

appends two additional directories. It may be convenient to put such an expression in the file maxima-init.mac so that the file search path is assigned automatically when Maxima starts. See also Introduction for Runtime Environment.

Multiple filename extensions and multiple paths can be specified by special “wildcard” constructions. The string ### expands into the sought-after name, while a comma-separated list enclosed in curly braces {foo,bar,baz} expands into multiple strings. For example, supposing the sought-after name is neumann,

"/home/{wfs,gcj}/###.{lisp,mac}"

expands into /home/wfs/neumann.lisp, /home/gcj/neumann.lisp, /home/wfs/neumann.mac, and /home/gcj/neumann.mac.

Categories: File input · Global variables ·
Function: file_type (filename)

Returns a guess about the content of filename, based on the filename extension. filename need not refer to an actual file; no attempt is made to open the file and inspect the content.

The return value is a symbol, either object, lisp, or maxima. If the extension is matches one of the values in file_type_maxima, file_type returns maxima. If the extension matches one of the values in file_type_lisp, file_type returns lisp. If none of the above, file_type returns object.

See also pathname_type.

See file_type_maxima and file_type_lisp for the default values.

Examples:

(%i2) map('file_type,
          ["test.lisp", "test.mac", "test.dem", "test.txt"]);
(%o2)            [lisp, maxima, maxima, object]
Categories: File input ·
Option variable: file_type_lisp

Default value: [l, lsp, lisp]

file_type_lisp is a list of file extensions that maxima recognizes as denoting a Lisp source file.

See also file_type.

Option variable: file_type_maxima

Default value: [mac, mc, demo, dem, dm1, dm2, dm3, dmt, wxm]

file_type_maxima is a list of file extensions that maxima recognizes as denoting a Maxima source file.

See also file_type.

Function: load (filename)

Evaluates expressions in filename, thus bringing variables, functions, and other objects into Maxima. The binding of any existing object is clobbered by the binding recovered from filename.

filename must be a string, symbol, or Lisp pathname (as created by filename_merge). To find the file, load calls file_search with file_search_maxima and file_search_lisp as the search directories. If load succeeds, it returns the name of the file. Otherwise load prints an error message.

load works equally well for Lisp code and Maxima code. Files created by save, translate_file, and compile_file, which create Lisp code, and stringout, which creates Maxima code, can all be processed by load. load calls loadfile to load Lisp files and batchload to load Maxima files.

load does not recognize :lisp constructs in Maxima files, and while processing filename, the global variables _, __, %, and %th have whatever bindings they had when load was called.

Note also that structures will only be read back as structures if they have been defined by defstruct before the load command is called.

See also loadfile, for Lisp files; and batch, batchload, and demo. for Maxima files.

See file_search for more detail about the file search mechanism. The numericalio chapter describes many functions for loading csv and other data files.

During Maxima file loading, the variable load_pathname is bound to the pathname of the file being loaded.

load evaluates its argument.

Categories: Session management · File input ·
System variable: load_pathname

Default value: false

When a file is loaded with the functions load, loadfile or batchload the system variable load_pathname is bound to the pathname of the file which is processed.

The variable load_pathname can be accessed from the file during the loading.

Example:

Suppose we have a batchfile test.mac in the directory

"/home/dieter/workspace/mymaxima/temp/" with the following commands

print("The value of load_pathname is: ", load_pathname)$
print("End of batchfile")$

then we get the following output

(%i1) load("/home/dieter/workspace/mymaxima/temp/test.mac")$
The value of load_pathname is:  
                   /home/dieter/workspace/mymaxima/temp/test.mac 
End of batchfile
Categories: File input ·
Function: loadfile (filename)

Evaluates Lisp expressions in filename. loadfile does not invoke file_search, so filename must include the file extension and as much of the path as needed to find the file.

loadfile can process files created by save, translate_file, and compile_file. The user may find it more convenient to use load instead of loadfile.

Categories: Session management · File input ·
Option variable: loadprint

Default value: true

loadprint tells whether to print a message when a file is loaded.

  • When loadprint is true, always print a message.
  • When loadprint is 'loadfile, print a message only if a file is loaded by the function loadfile.
  • When loadprint is 'autoload, print a message only if a file is automatically loaded. See setup_autoload.
  • When loadprint is false, never print a message.
Categories: File input · Global flags ·
Function: directory (path)

Returns a list of the files and directories found in path in the file system.

path may contain wildcard characters (i.e., characters which represent unspecified parts of the path), which include at least the asterisk on most systems, and possibly other characters, depending on the system.

directory relies on the Lisp function DIRECTORY, which may have implementation-specific behavior.

Categories: File input ·
Function: pathname_directory (pathname)
Function: pathname_name (pathname)
Function: pathname_type (pathname)

These functions return the components of pathname.

Examples:

(%i1) pathname_directory("/home/dieter/maxima/changelog.txt");
(%o1)                 /home/dieter/maxima/
(%i2) pathname_name("/home/dieter/maxima/changelog.txt");
(%o2)                       changelog
(%i3) pathname_type("/home/dieter/maxima/changelog.txt");
(%o3)                          txt
Categories: File input ·
Function: printfile (path)

Prints the file named by path to the console. path may be a string or a symbol; if it is a symbol, it is converted to a string.

If path names a file which is accessible from the current working directory, that file is printed to the console. Otherwise, printfile attempts to locate the file by appending path to each of the elements of file_search_usage via filename_merge.

printfile returns path if it names an existing file, or otherwise the result of a successful filename merge.

Categories: File input · Console interaction ·
Function: save
    save (filename, name_1, name_2, name_3, …)
    save (filename, values, functions, labels, …)
    save (filename, [m, n])
    save (filename, name_1=expr_1, …)
    save (filename, all)
    save (filename, name_1=expr_1, name_2=expr_2, …)

Stores the current values of name_1, name_2, name_3, …, in filename. The arguments are the names of variables, functions, or other objects. If a name has no value or function associated with it, it is ignored. save returns filename.

save stores data in the form of Lisp expressions. If filename ends in .lisp the data stored by save may be recovered by load (filename). See load.

The global flag file_output_append governs whether save appends or truncates the output file. When file_output_append is true, save appends to the output file. Otherwise, save truncates the output file. In either case, save creates the file if it does not yet exist.

The special form save (filename, values, functions, labels, ...) stores the items named by values, functions, labels, etc. The names may be any specified by the variable infolists. values comprises all user-defined variables.

The special form save (filename, [m, n]) stores the values of input and output labels m through n. Note that m and n must be literal integers. Input and output labels may also be stored one by one, e.g., save ("foo.1", %i42, %o42). save (filename, labels) stores all input and output labels. When the stored labels are recovered, they clobber existing labels.

The special form save (filename, name_1=expr_1, name_2=expr_2, ...) stores the values of expr_1, expr_2, …, with names name_1, name_2, … It is useful to apply this form to input and output labels, e.g., save ("foo.1", aa=%o88). The right-hand side of the equality in this form may be any expression, which is evaluated. This form does not introduce the new names into the current Maxima environment, but only stores them in filename.

These special forms and the general form of save may be mixed at will. For example, save (filename, aa, bb, cc=42, functions, [11, 17]).

The special form save (filename, all) stores the current state of Maxima. This includes all user-defined variables, functions, arrays, etc., as well as some automatically defined items. The saved items include system variables, such as file_search_maxima or showtime, if they have been assigned new values by the user; see myoptions.

save evaluates filename and quotes all other arguments.

Categories: Session management · File output ·
Function: stringout
    stringout (filename, expr_1, expr_2, expr_3, …)
    stringout (filename, [m, n])
    stringout (filename, input)
    stringout (filename, functions)
    stringout (filename, values)

stringout writes expressions to a file in the same form the expressions would be typed for input. The file can then be used as input for the batch or demo commands, and it may be edited for any purpose. stringout can be executed while writefile is in progress.

The global flag file_output_append governs whether stringout appends or truncates the output file. When file_output_append is true, stringout appends to the output file. Otherwise, stringout truncates the output file. In either case, stringout creates the file if it does not yet exist.

The general form of stringout writes the values of one or more expressions to the output file. Note that if an expression is a variable, only the value of the variable is written and not the name of the variable. As a useful special case, the expressions may be input labels (%i1, %i2, %i3, …) or output labels (%o1, %o2, %o3, …).

If grind is true, stringout formats the output using the grind format. Otherwise the string format is used. See grind and string.

The special form stringout (filename, [m, n]) writes the values of input labels m through n, inclusive.

The special form stringout (filename, input) writes all input labels to the file.

The special form stringout (filename, functions) writes all user-defined functions (named by the global list functions)) to the file.

The special form stringout (filename, values) writes all user-assigned variables (named by the global list values)) to the file. Each variable is printed as an assignment statement, with the name of the variable, a colon, and its value. Note that the general form of stringout does not print variables as assignment statements.

Categories: Session management · File output ·
Function: with_stdout
    with_stdout (f, expr_1, expr_2, expr_3, …)
    with_stdout (s, expr_1, expr_2, expr_3, …)

Evaluates expr_1, expr_2, expr_3, … and writes any output thus generated to a file f or output stream s. The evaluated expressions are not written to the output. Output may be generated by print, display, grind, among other functions.

The global flag file_output_append governs whether with_stdout appends or truncates the output file f. When file_output_append is true, with_stdout appends to the output file. Otherwise, with_stdout truncates the output file. In either case, with_stdout creates the file if it does not yet exist.

with_stdout returns the value of its final argument.

See also writefile and display2d.

(%i1) with_stdout ("tmp.out", for i:5 thru 10 do
      print (i, "! yields", i!))$
(%i2) printfile ("tmp.out")$
5 ! yields 120 
6 ! yields 720 
7 ! yields 5040 
8 ! yields 40320 
9 ! yields 362880 
10 ! yields 3628800
Categories: File output ·
Function: writefile (filename)

Begins writing a transcript of the Maxima session to filename. All interaction between the user and Maxima is then recorded in this file, just as it appears on the console.

As the transcript is printed in the console output format, it cannot be reloaded into Maxima. To make a file containing expressions which can be reloaded, see save and stringout. save stores expressions in Lisp form, while stringout stores expressions in Maxima form.

The effect of executing writefile when filename already exists depends on the underlying Lisp implementation; the transcript file may be clobbered, or the file may be appended. appendfile always appends to the transcript file.

It may be convenient to execute playback after writefile to save the display of previous interactions. As playback displays only the input and output variables (%i1, %o1, etc.), any output generated by a print statement in a function (as opposed to a return value) is not displayed by playback.

closefile closes the transcript file opened by writefile or appendfile.

Categories: File output · Console interaction ·

Next: , Previous: , Up: File Input and Output   [Contents][Index]